Diamond Guard Filters
As all known,inside the internal components of HP waterjet machines, there are wandering particles become dislocated and travel through the high pressure lines, which end up at the waterjet orifice, possibly damaging the orifice edge. When debris is larger than the orifice ID, the orifice assembly becomes plugged or partially blocked.
- Blocked or Cracked Orifices
- Decreased Jet Stream Coherency
- Ineffective Cutting
- Accelerate the Wear of Cutting Head Components
Diamond Guard Filters
Diamond Guard Filters
Natural Diamond
PRODUCT FEATURES
- Performance Grade: 15 to 20 Times longer life than Sapphire
- Typical 1,000+ hours of life
- 100% tested at 40K psi
- Zero ID edge degradation over use
- Greatest cutting speeds
- Typical 1,000+ hours of life
- Maximized uptime and productivity
As all known,inside the internal components of HP waterjet machines, there are wandering particles become dislocated and travel through the high pressure lines, which end up at the waterjet orifice, possibly damaging the orifice edge. When debris is larger than the orifice ID, the orifice assembly becomes plugged or partially blocked.
- Blocked or Cracked Orifices
- Decreased Jet Stream Coherency
- Ineffective Cutting
- Accelerate the Wear of Cutting Head Components
S T A N D A R D T Y P E S
Lasting-51
Thread Pitch: 3/8”-24
Description: 3/8” hex head
Sealing Angle : 84°
Replace: 4065, 4067
Description: 3/8” hex head
Sealing Angle : 84°
Replace: 4065, 4067
Lasting-52
Thread Pitch: 3/8”-24
Description: 3/8” hex head
Sealing Angle : 112°
Replace: 3024, 3546, Type972, OS6
Description: 3/8” hex head
Sealing Angle : 112°
Replace: 3024, 3546, Type972, OS6
Lasting-53
Thread Pitch: 7/16”-20
Description: 7/16” hex head
Sealing Angle : 112°
Replace: 3076, 3604, Type975, OS7
Description: 7/16” hex head
Sealing Angle : 112°
Replace: 3076, 3604, Type975, OS7
Lasting-55
Thread Pitch: M10x1.5
Description: 5mm key Slot, Shortened
Sealing Angle : 58°
Replace: Form 21, 3261, 3688, Type 965
Description: 5mm key Slot, Shortened
Sealing Angle : 58°
Replace: Form 21, 3261, 3688, Type 965
Lasting-56
Thread Pitch: 1/4"-28 UNF
Description: 1/4" hex head
Sealing Angle : 112°
Replace: 3026, 3606
Description: 1/4" hex head
Sealing Angle : 112°
Replace: 3026, 3606
Lasting-57
Thread Pitch: M10x1.5, with Flow Straightener
Description: 5mm key Slot, Shortened
Sealing Angle : 58°
Replace: Form 21, 3261, 3688, Type 965
Description: 5mm key Slot, Shortened
Sealing Angle : 58°
Replace: Form 21, 3261, 3688, Type 965
Lasting-60
Thread Pitch: M12x1.5
Description: 6mm hex head
Sealing Angle: 88°
Replace: Type123
Description: 6mm hex head
Sealing Angle: 88°
Replace: Type123
Lasting-65
Thread Pitch: M8x1
Description: 9mm hex head
Sealing Angle: 94°
Replace: Type982
Description: 9mm hex head
Sealing Angle: 94°
Replace: Type982
